1. Make sure the Control Knob is in the “OFF” position
2. Fully open LP cylinder valve. (For initial start or after any cylinder change, hold control knob in for 2 minutes to purge air from gas lines before proceeding.)
3. Push in Gas Control Knob, turn counterclockwise to “LOW” and press RED Ignitor button to light the fire pit. If needed, keep the control knob depressed and continue pressing the RED Ignitor button until the fire pit lights. (You should hear a clicking sound)
4. After the fire pit lights, release control knob. To increase the flame, turn the control knob counterclockwise to “HIGH”. To decrease the flame, turn the control knob clockwise to “LOW”.

(If burner fails to remain lit, all valves should be closed and a waiting period of at least 5 minutes should pass before attempting to light again.)